RADWAG PS 2100.R2 User Manual

- 119 -
8. If <ANOTHER> liquid of determined density has been chosen, you should
insert its density
9. After inserting this data, the program will pass on to the proper
measuring process,
10. First, a mass sample should be placed on the top weighing pan of
the kit (weighing in the air), and after the indication stabilization the
result is approved
11. Next, a mass sample should be placed on the bottom pan of the kit
(mass determination in the liquid), and after the indication
stabilization, approve the result

RADWAG PS 2100.R2 Specifications

General

Brand	RADWAG
Model	PS 2100.R2
Category	Scales
Language	English