Tare the balance
Format: T CR LF
Accessible responses:
- command understood and in progress
-
- command understood and in progress
-
command understood but taring range exceeded
- command understood and in progress
-
time limit exceeded while waiting for stable measurement result
- command understood but not accessible at this moment
Give tare value
Format: OT CR LF
Accessible response: OT_TARA CR LF – command carried out
Response format:
1 2 3 4-12 13 14 15 16 17 18 19
O T space tare space unit space CR LF
Tare - 9 characters with right justification
Unit - 3 characters with left justification
CAUTION:
Tare value is always given in adjustment unit.
Set tare
Format: UT_TARA CR LF, where TARE – tare value
Accessible responses:
- command understood but not accessible at this moment
- command not recognised (tare format incorrect)
CAUTION:
Use dot in tare format as decimal point.
To Next Page
Loading...
Need help?
General