19
Fig. 7. Weighing- choice of weighing platform
TAB- by means of PC keyboard11
PRINT+n – by means of balance keyboard
7.1. Tarring
For determining net mass place on the pan package
of load and when indication is stable press T key.
Fig. 7a. Tarring – display view
1 –TARE signature (NET is being displayed)
2 –stable result signature
Tarring can be performed repeatedly in the whole balance weighing range.
Using tare function pay attention not to exceed the maximum weighing range.
After removing the load and package display will indicate mass equal to mass
of tare with minus sign.
Notice:
Tare value is not stored in balance memory and is deleted after disconnecting
from mains
To Next Page
Loading...
