Radwin Transportation FiberinMotion

To Next Page

To Previous Page

FinMDeploymentGuide Release4.5.10 4‐23

ConfiguringtheCo‐ChannelNeighborInterferenceMitigationOption ConfiguringtheRadioNetwork

12.ClicktheTowerstab:



Figure4‐13:TowersTaboftheConfigurator

• ColumnAshowsthenumberofeachTBS.

• ColumnBshowsthe“name”(orserialnumber)ofeachTBS.

• ColumnAAshowstheIPaddressofeachTBS.

• ColumnAJindicateswhichfrequency(F1,F2,orF3inourexample)isbeingused

forthespecificTBS.

• ColumnAKshowsthevalueofthefrequencyinkHz.

• ColumnAVshowsthename(s)oftheco‐channelneighbor(s).

• ColumnAWshowstheIPaddress(es)oftheco‐channelneighbor(s).

• ColumnAYshowsthe“CNIndex”(whichtimeslottheindicatedTBSistouse).

Wecanseetha

tinourexample,wearere‐usingF1throughF3

(columnsoftheExcelsheetnotneededhavebeencollapsedforclarity).

13.Recordtheco‐channelneighbor(s)ofeachTBSasfollows:

Radwin Transportation FiberinMotion - Page 104