Radwin Transportation FiberinMotion - Page 20

FinMDeploymentGuide Release4.5.10 2‐7
TBSMounting SiteInstallation
Thinpole(diameter3/4to11/2):Positionthepoleclampasshowninthefo llowi ngtwofigures,donotcompletelytightenth ebolts:
2. PlacethisassemblyonthepolewhereyouwanttomounttheTBS.Onceitisinplace,
rotatethepoleclampasshown,thentightenbothbolts.
Figure2‐5:Thinpole:Fastenclamptobase
plate
Figure2‐6:Thinpole:Donotcompletely
tightenbolts
Figure2‐7:Thinpole:Rotateclamp Figure2‐8:Thinpole:tightenbolts