Rain Bird ESP-RZ User Manual

2
Normal Operation
AUTO
Auto
Watering occurs automatically according to
programmed irrigation schedules.
 Press the AUTO key to resume normal operation
whenever programming is completed and to
monitor active watering.

NOTE: Unless the OFF key is pressed, the
controller will revert to AUTO mode by default
after 10 minutes, if no programming activity
(key presses) occurs during that time.
In Auto Mode:
The display shows the current time, date and day of
the week:
T
2
W
3
TH
4
F
5
S
6
SU
7
M
1
MD
YYYY
PM
During Watering:
The display shows a blinking sprinkler symbol,
the active Zone number and watering Run Time
remaining for that Zone.
Z
O
N
E
MIN
BACK OFF ON NEXT
Zone
Run
Time
 Press
+
or
–
to adjust watering Run Time
remaining for the active Zone as desired.
 Press NEXT to immediately cancel watering for
the active Zone and advance to the next Zone in
the irrigation queue.
OFF
Off
Cancel all active watering immediately and
disable automatic irrigation.
 Press the OFF key to immediately cancel all
active watering.
BACK OFF ON NEXT
Programmed irrigation schedules remain stored in
memory even when the controller is turned o or if
power is lost.

NOTE: Press the AUTO key to resume normal
operation. Automatic irrigation will NOT occur if
the controller remains in OFF mode.
Basic Programming
DATE/TIME
Date/Time
Set the current calendar Date and Time of day.
 Press the DATE/TIME key.
 Press
+
or
–
to set the month (M); then press
NEXT to select and set the day (D), then year
(YYYY).
T
2
W
3
TH
4
F
5
S
6
SU
7
M
1
MD
YYYY
AM
BACK OFF ON NEXT
DATE

Rain Bird ESP-RZ Specifications

General

Brand	Rain Bird
Model	ESP-RZ
Category	Controller
Language	English