3
Press
+
or
–
to set the hour (ensuring that AM/
PM setting is correct); then press NEXT to select
and set the minutes.
T
2
W
3
TH
4
F
5
S
6
SU
7
M
1
MD
YYYY
AM
TIME
NOTE: Two AAA batteries can be installed to
retain date and time in the event of a power
outage. See “Install Batteries” for details.
SCHEDULE
Zone Schedule
Create customized irrigation schedules to run
automatically at specific times, durations and
intervals.
Press the ZONE SCHEDULE key.
1
Select Zone
Zones are designated areas (for example,
“Rose Garden”) that you define as locations for
watering. See “Programming Chart” for details.
Press
+
or
–
to select the desired Zone Number;
then press NEXT.
Z
O
N
E
1
2
MIN
BACK OFF ON NEXT
Zone
2
Set Watering Run Times
Watering Run Times are durations (for example,
20 minutes) set for watering.
NOTE: Run Times can be set between 1 to 199
minutes.
Press
+
or
–
to set the desired Run Time (MIN);
then press NEXT.
Z
O
N
E
MIN
1
2
BACK OFF ON NEXT
RUN
TIME
3
Set Watering Start Times
Watering Start Times are times of day at which
watering is set to begin.
NOTE: A total of up to four Start Times (1-4) are
available for each Zone.
Press
+
or
–
to set the 1st Start Time (ensuring
that AM/PM setting is correct); then press NEXT.
NOTE: Start Time adjustments are set in 10
minute increments.
Z
O
N
E
1
2
MIN
START
TIME
REPEAT as desired to set additional Start Times
for that Zone.
NOTE: Pressing NEXT when
-:-
(OFF) is
blinking on the display will advance to Step 4.