RainPoint ITV205 Faq

— 2 —
1. Insert the batteries and tighten the timer on the faucet.
2. Keep the tap turned off and turn the dial on the timer to ON.
3. Press and hold the OK button for 3-5 seconds to manually open the valve in
the timer.
4. Press and hold the OK button for 3-5 seconds to manually open the valve
inside the timer, then press and hold for another 3-5 seconds to close the valve.
5. Repeat step 3, 3 to 5 times.
6. Turn on the tap, press and hold the OK button for 3-5 seconds and open the
valve manually again.
7. Open the valve manually again and check that everything is OK.
8. Then press and hold the button again for 3-5 seconds and turn it off manually.
9. If you still can't turn off the timer properly, repeat steps 3-4 several times (10
times)

Clean the inlet screen of impurities and restart the valve according to the above
steps.

Press and hold the OK button to open the valve manually to check that it
opens/closes properly.

Turn the knob to the off button to check if the valve can be closed.
Q: What if there is water mist in the screen of the timer?

The temperature difference between the inside and outside of the device is too
great, it will return to normal after a period of time and will not affect the

RainPoint ITV205 Specifications

General

Brand	RainPoint
Model	ITV205
Category	Timer
Language	English