EasyManua.ls Logo

RainPoint TWG009BW - Warnings & Warranty

Default Icon
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6. Low water
pressure
1. Filter blockage.
Inlet pressure not
sucient to suppo
watering
1. Check if the lter is
clogged, if so,clean
or replace the lter. 2.
Make sure the timer is
installed properly and
not cross-threaded.
3. Installation of a
booster pump or
other auxilia
equipment of
increasing pressure.
Issue Possible Cause Advice
WARNINGS
1) For outdoor use only. Placing the timer in the sheltered outdoors will
prolongits lifetime.
2) To avoid damage, please tighten it without using tools.
3) The lter should be placed horizontally in the water inlet to prevent leakage.
4) When low power, please replace the batteries to avoid the interruption of
normal operation; when replacing the batteries, please make sure that the
batte tray is d.
5) When the timer is not in use, please remove the batteries and store it ndoors.
6) Don’t use the timer under the temperature more than 120℉(50℃), or less
than 38℉(3℃).
7) Don’t subject the product to extreme force and shock.
8) Severe electrical shock could result if water is sprayed into outlets or sources
of electrical current. Never immerse the product in water.
This product is MADE IN CHINA and conforms to the national standards
of the United States, Britain, Germany and France. Please use this
product correctly. If it needs to be discarded, please properly dispose
according to the national requirements. Please protect the environment.
- 24 -

Related product manuals