Raise3D E2 - ideaMaker Software Installation: Windows Guide; ideaMaker Installation (Windows); Choose Install Location

Raise3D E2_Quick Start Guide
www.raise3d.com
- 13 -
Software Installation
⚫ ideaMaker Installation
The slicing software, ideaMaker, is available
on the USB storage device included with your
printer.
Additional downloads and versions are
available online at:
https://www.raise3d.com/download/
➢ Open the installer and choose your preferred language. Select your preferred installation location for
ideaMaker, and click "Next".
www.stomshop.pro