MEDIA MODE
Operating Media Mode
Media Mode is entered by pushing the MEDIA button
located on the faceplate.
Audio Source Selection
Once in Media Mode, press the Source or Source Select
button on the touchscreen and the desired mode but-
ton on the touchscreen. USB, AUX, and Bluetooth® are
the Media sources available. When available, you can
select the Browse button on the touchscreen to be
given these options:
•
Now Playing
•
Artists
•
Albums
•
Genres
•
Songs
•
Playlists
•
Folders
For the Uconnect 3 With 5-inch Display, Media Mode is
entered by pushing the MEDIA button located on the
faceplate.
Types of Media Modes
USB MODE
Overview
USB Mode is entered by inserting a USB device into the
USB port, Another way is by pushing the MEDIA button
on the faceplate and then selecting the USB button.
On the Uconnect 3 With 5-inch Display, if you insert a
USB device with the ignition in ON/RUN, the unit will
switch to USB Mode and begin to play. The display will
show the track number and index time in minutes and
seconds. Play will begin at the start of track 1.
BLUETOOTH® MODE
Overview
Bluetooth® Streaming Audio or Bluetooth® Mode is
entered by pairing a Bluetooth® device, containing
music, to the Uconnect system.
Before proceeding, the Bluetooth® device must be
paired to the Uconnect Phone to communicate with the
Uconnect system.
On the Uconnect 3 With 5-inch Display, push the MEDIA
button located on the faceplate. Once in Media Mode,
press the Source button on the touchscreen and select
the Bluetooth® button
page 193.
To access Bluetooth® Mode, press the Bluetooth® but-
ton on the left side of the touchscreen or under the
Source Select/Select Source button (if equipped).
AUX MODE
Overview
Auxiliary Mode (AUX) is entered by inserting an AUX
device using a cable with a 3.5 mm audio jack into the
AUX port, Another way is by pushing the MEDIA button
on the faceplate, selecting the Source button and then
the AUX button.
To insert an Auxiliary device, gently insert the Auxiliary
device cable into the AUX port. If you insert an Auxiliary
device with the ignition and the radio on, the unit will
switch to AUX Mode and begin to play.
Controlling The Auxiliary Device
Auxiliary Mode (AUX) is entered by inserting an AUX
device using a cable with a 3.5 mm audio jack into the
AUX port Another way is by pushing the MEDIA button
on the faceplate, selecting the Source button, and then
the AUX button.
Uconnect 3 With 5-inch Display Operating Media Mode
1 — Seek Down
2—Browse
3 — Source
4 — Pause/Play
5 — Info
6 — More Options
7 — Seek Up
MULTIMEDIA 191
5
To Next Page
Loading...
