EasyManua.ls Logo

RAM CHASSIS CAB 2024 - Forward Utility Lights and Rear Guidance Lights - if Equipped; Tilt Side Mirrors in Reverse - if Equipped; Heated Mirrors - if Equipped

RAM CHASSIS CAB 2024
360 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NOTE:
If the Power Convex Mirror Switch is not pushed a sec-
ond time, the switch will automatically default back to
the larger portion of the outside mirrors after a period
of time.
FORWARD UTILITY LIGHTS AND
REAR GUIDANCE LIGHTS
IF EQUIPPED
The forward utility lights and reverse guidance lights
switches are located on the drivers door trim panel,
above the power mirror controls. These switches enable
the forward or reverse lights located on the driver and
passenger outside mirrors.
When either button is pressed the corresponding light
on the outside mirror will remain on for ten minutes.
The vehicle must be in the ON/RUN or ACC position.
When the light is active, the switch on the door panel
will illuminate. Pushing the switch a second time will
turn the lights off.
When the lights are activated using the switch on the
door panel , the reverse guidance lights will illuminate
when the vehicle transmission is in PARK, NEUTRAL, or
REVERSE and the forward utility lights will illuminate in
all ignition positions. The rear guidance lights will turn
off when the vehicle transmission is placed in DRIVE.
The rear guidance lights will also illuminate when the
cargo light switch is pressed on the headlight switch
panel. This feature is programmable through the
Uconnect system
page 165.
TILT SIDE MIRRORS IN REVERSE
IF EQUIPPED
This feature provides automatic outside mirror position-
ing which will assist with the driver’s ground visibility.
The outside mirrors will move slightly downward from
the present position when the vehicle is shifted into
REVERSE. The outside mirrors will then return to the
original position when the vehicle is shifted out of
REVERSE. If the vehicle is equipped with Driver Memory
Settings, this feature will be linked to the program-
mable settings.
NOTE:
The Tilt Side Mirrors In Reverse feature can be turned
on and off using the Uconnect system
page 165.
HEATED MIRRORS IF EQUIPPED
These mirrors are heated to melt frost or ice.
This feature will be activated whenever you
turn on the rear window defroster
(if equipped)
page 50.
Forward and Reverse Light Switches
Forward Utility Light
Reverse Guidance Light
40 GETTING TO KNOW YOUR VEHICLE

Table of Contents

Related product manuals