EasyManua.ls Logo

RAM CHASSIS CAB 2024 - Premium Instrument Cluster Descriptions - Gasoline

RAM CHASSIS CAB 2024
360 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PREMIUM INSTRUMENT CLUSTER
DESCRIPTIONS GASOLINE
1. Temperature Gauge
The temperature gauge shows engine coolant
temperature. Any reading within 203°F - 230°F
(95°C - 110°C) indicates that the engine cool-
ing system is operating satisfactorily.
The pointer will likely indicate a higher tempera-
ture when driving in hot weather, up mountain
grades, or when towing a trailer. It should not be
allowed to exceed the upper limits of the normal
operating range.
WARNING!
A hot engine cooling system is dangerous. You or oth-
ers could be badly burned by steam or boiling cool-
ant. It is recommended to call an authorized dealer
for service if your vehicle overheats. If you decide to
look under the hood yourself, follow the warnings
under the Cooling System Pressure Cap paragraph
page 297.
CAUTION!
Driving with a hot engine cooling system could dam-
age your vehicle. If the temperature gauge reads “H,”
pull over and stop the vehicle. Idle the vehicle with
the air conditioner turned off until the pointer drops
back into the normal range. If the pointer remains on
the “H,” turn the engine off immediately and call an
authorized dealer for service.
2. Speedometer
Indicates vehicle speed.
3. Fuel Gauge
The pointer shows the level of fuel in the fuel
tank when the Keyless Push Button Ignition is in
the ON/RUN position.
The fuel pump symbol points to the
side of the vehicle where the fuel
door is located.
4. Tachometer
Indicates the engine speed in revolutions per
minute (RPM x 1000).
5. Instrument Cluster Display
The instrument cluster display features a driver
interactive display
page 78.
NOTE:
The hard telltales will illuminate for a bulb check
when the ignition is first cycled.
72 GETTING TO KNOW YOUR INSTRUMENT PANEL

Table of Contents

Related product manuals