Unfolding The Load Floor/Crew Cab
1. Lift the 60/40 seat cushion(s) to the upward
position.
2. Unfold both the legs using the straps.
3. Lift the front panel until the load floor unfolds into
position.
4. Reverse the procedure to store the load floor.
Positioning The Load Floor For Storage Access Under
The Seat
1. Lift the 60/40 seat cushion(s) to the upward
position.
2. Unsnap the securing snap located at either side of
the load floor.
3. Lift the load floor up to access storage under the
load floor.
WARNING!
Do not drive with the load floor in the up position.
When stopping fast or in an accident, the load floor
could move to the down position causing serious
injury.
4. Reverse the procedure to put the load floor back in
the secured down position before you operate the
vehicle.
Below Rear Seat Storage (Crew Cab) —
If Equipped
The Crew Cab models provide additional storage under
the rear seats. Lift the seats to access the storage
compartment.
To open the storage compartments, unsnap the secur-
ing snap located at either side of the load floor and lift
upward on the fold flat lid.
Load Floor Legs In Stowed Position
Load Floor Legs In Opened Position
Load Floor In Open Position
Load Floor Securing Straps/Crew Cab
GETTING TO KNOW YOUR VEHICLE 59
2
To Next Page
Loading...
