Up And Down Arrow Buttons:
Using the up
or down arrow button allows you
to cycle through the Main Menu Items.
Left
And Right Arrow Buttons:
Using the left
or right arrow button allows you
to cycle through the submenu items of the Main menu
item.
NOTE:
•
Holding the up / down or left / right
arrow button will loop the user through the currently
selected menu or options presented on the screen.
•
Main menu and submenus wrap for continuous
scrolling.
•
Upon returning to a main menu, the last submenu
screen viewed within that main menu will be displayed.
OK Button:
For Digital Speedometer:
•
Pushing the OK button changes units (mph
or km/h).
Menu Button
•
Press Menu button for Home Screen display.
•
Navigate left or right to highlight desired
tile. Press OK to select desired. Once OK is pressed,
cluster will navigate to selected submenu (e.g.
“Audio”).
NOTE:
Exiting Home Screen Speed Limit tile and Naviga-
tion tile with no Ethernet navigates to Speedometer
submenu.
•
Press up or down to select different screen
within selected category.
•
If Menu button is pressed while in this view, cluster
will return to previously displayed screen.
•
Press and hold OK button to enter edit mode.
○ Instruction text may overlay lower tachometer
For Screen Setup:
•
OK button allows user to enter menu and
submenus.
•
Within each submenu layer, the up and down
arrow buttons will allow the user to select the
item of interest.
•
Pushing the OK button makes the selection and a
confirmation screen will appear (returning the user
to the first page of the submenu).
•
Pushing the left arrow button will exit each sub-
menu layer and return to the main menu.
Base/Midline Instrument Cluster Display Control Buttons
1 — Left Arrow Button
2 — Up Arrow Button
3 — Right Arrow Button
4 — Down Arrow Button
5 — OK Button
Premium Instrument Cluster Display Control Buttons
1 — Left Arrow Button
2 — Up Arrow Button
3 — Right Arrow Button
4 — Down Arrow Button
5 — OK Button
6 — Menu Button
GETTING TO KNOW YOUR INSTRUMENT PANEL 79
3
To Next Page
Loading...
