•
Fuel Filter Life — If Equipped
•
Fuel Tank Levels — If Equipped
•
Oil Life
•
Battery Voltage — If Equipped
•
Gauge Summary — If Equipped
○ Coolant Temp
○ Trans Temp
○ Oil Temp
○ Oil Pressure
•
Engine Hours — If Equipped
PREMIUM CLUSTER
•
Fuel Economy
○ Average
○ Current
○ Range to Empty
•
Gauge Summary
○ Coolant Temperature — If Equipped
○ Battery Voltage — If Equipped
○ Trans Temperature
•
Oil Summary
○ Oil Temperature
○ Oil Life
○ Oil Pressure — If Equipped
•
Tire Pressure Monitor System
•
Diesel Summary
○ Exhaust Brake — If Equipped
○ Boost Pressure — If Equipped
•
Fuel Filter Life — If Equipped
•
Diesel Particulate Filter
•
Fuel Tank Levels — If Equipped
•
Engine Hours — If Equipped
Off Road
Push and release the up or down arrow button
until the Off Road menu icon is displayed in the instru-
ment cluster display. Push and release the left
or
right
arrow button to scroll through the information
submenus.
•
Drivetrain
○ Front Wheel Angle: displays the graphical and
numerical value of calculated average front
wheel angle from the steering wheel orientation.
○ Transfer Case Lock Status: displays “Lock”
graphic only during 4WD High, 4WD High Part
Time, 4WD Low status.
○ Axle Lock And Sway Bar Status (If Equipped): dis-
plays front and rear or rear only axle locker
graphic, and sway bar connection graphic with
text message (connected or disconnected).
•
Pitch And Roll
○ Displays the pitch and roll of the vehicle in the
graphic with the angle number on the screen.
NOTE:
When vehicle speed becomes too high to display the
pitch and roll, “- -” will display in place of the numbers,
and the graphic will be grayed out. A message indicat-
ing the necessary speed for the feature to become
available will also display.
Fuel Economy — If Equipped
Push and release the up or down arrow button
until the Fuel Economy menu item is highlighted in the
instrument cluster display. Push and Hold the right
arrow button to reset Average Fuel Economy.
•
Current Fuel Economy Gauge
•
Average Fuel Economy Value
•
Range To Empty
•
Fuel Tank Levels — If Equipped
Trip A/Trip B
Push and release the up or down arrow button
until the Trip menu item is highlighted in the instrument
cluster display. Push and release the right
arrow
button to enter the submenus of Trip A and Trip B. The
Trip A or Trip B information will display the following:
•
Distance
•
Average Fuel Economy
•
Elapsed Time
Push and hold right
arrow button to reset all
information.
Navigation — If Equipped
Push and release the up or down arrow button
until the Navigation display title is highlighted in the
instrument cluster display, “Hold OK to Start Route” will
display when no active route is set. “Hold OK to Cancel
Route” will display when active route is set. Use the left
or right arrow button to zoom in or out on the
display
page 165.
Trailer Tow
Push and release the up or down arrow button
until the Trailer Tow menu item is highlighted in the
instrument cluster display. Push and release the right
or left arrow button to cycle through the follow-
ing trailer tow information:
•
Trip (trailer specific) Distance: Push and hold the
OK button to reset the distance.
•
Integrated Trailer Brake Module (ITBM):
○ Braking Output
○ Trailer Type
○ ITBM Gain
•
Trailer Light Check: Push and hold the OK button to
begin the Trailer Light Test sequence.
82 GETTING TO KNOW YOUR INSTRUMENT PANEL
To Next Page
Loading...
