R&M LM - 5.1.2 Environmental Data; 5.1.3 Optional equipment

LM10 I&M MANUAL/EN/11.30.2010
17/85
This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret
that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.
Copyright © (2010) R&M Materials Handling, Inc. All rights reserved.
5.1.2 Environmental Data
Ambi
ent temperature: -10°C to +40°C
Protection degree: IP55 as standard
Sound level: 70 decibels at 1 m
5.1.3 Optional equipment
 Limi
t Switch: This cuts off the directional movement when the trolley reaches the end of its run.
 Electric Actuation Device: This actuates the supply line; the slide block must not exceed the rolling
profile (A).
 Brush: This allows for earthing, due to the brush rubbing on the profile element.
 Raceway Stops: Not supplied: These must be fitted on the profile element, at the end of the trolley run.
R&M Materials Handling, Inc. | 4501 Gateway Boulevard, Springfield, Ohio 45502 | PH: 1-937-525-5100 | FAX: 1-937-325-5319