To Next Page

To Previous Page

Instrument tour

R&S

LCX Series

28Getting Started 1179.2254.02 ─ 03

Table 4-4: Measurement function controls

Key Assigned functions

[L] Selects the function for measuring inductance.

[C] Selects the function for capacity measurement.

[R] Selects the measurement for a resistor.

[Transformer] Selects the transformer measurement.

4.1.2.5 Settings keys

The keys in the settings panel enable you to select measurement ranges and

additional parameters for executing the measurement.

Table 4-5: Measurement function controls

Key Assigned functions

[Freq.] Sets the signal frequency.

[Range] Selects the impedance range.

[Level] Sets the level.

[Comp.] Opens the "Open/Short/Load Correction" dialog for quick access.

[Bias Level] Sets the bias voltage and current.

[Bias Enable] Activates internal or external bias.

4.1.2.6 Measurement control keys

These keys provide control during the measuring procedure.

Table 4-6: Navigation controls

Key Assigned functions

[Auto] Activates the automatic selection of the measurement function.

[Hold] Freezes the measurement range, on the screen indicated with pre-

fix "Hold:" at the range value.

[Trig.] Triggers a measurement manually.

4.1.2.7 POWER On/Standby key

The [On/Standby] key switches the instrument from the standby to the ready state

or vice versa.

Front panel tour

R&S LCX Series Getting Started

Other manuals for R&S LCX Series