R&S ZNA50 - Page 1107

Command reference
R&S
®
ZNA
1107User Manual 1178.6462.02 ─ 20
CALCulate<Ch>:TRANsform:VNETworks:SENDed:EMBedding<PhyPt>:
TNDefinition <CircuitModel>
Selects the circuit model for single ended port embedding.
Suffix:
<Ch>
.
Channel number
<PhyPt> Physical port number
Parameters:
<CircuitModel> FIMPort | CSL | LSC | CSC | LSL | SLC | SCL | SCC | SLL |
SHLC | GSL | LSG | GSG | SLG | SGL | SGG
Possible circuit models (character data); see Table 7-6
*RST: CSL
Example: See CALCulate<Ch>:TRANsform:VNETworks:SENDed:
EMBedding<PhyPt>[:STATe]
Manual operation: See "Network" on page 671
CALCulate<Ch>:TRANsform:VNETworks:WAVes <Boolean>
Defines whether the wave-based, or the classical S parameter-based de-/embedding
calculation is used in channel <Ch>.
Suffix:
<Ch>
.
Channel number
Parameters:
<Boolean> ON (1)
Wave-based calculation (default)
OFF (0)
S parameter-based calculation
Manual operation: See "Offset > Wave De-/Embed." on page 698
7.3.1.26 CALCulate:TTIMe:...
Defines the properties and retrieves the results of the rise time measurement provided
with the Extended time domain analysis option R&S ZNA-K20.
CALCulate<Chn>:TTIMe:DATA? [<Data>]
Queries the results of the rise time measurement
Suffix:
<Chn>
.
Channel number used to identify the active trace
SCPI command reference