R&S ZNA50 - Page 366

GUI reference
R&S
®
ZNA
366User Manual 1178.6462.02 ─ 20
SOURce<Ch>:FREQuency:CONVersion:MIXer:PMFixed
[SENSe<Ch>:]FREQuency:CONVersion:MIXer:TFRequency<Stg>
[SENSe<Ch>:]FREQuency:CONVersion:MIXer:STAGes
OK
Activates the scalar mixer mode and closes the dialog. A "Mix" label in the channel list
indicates that a scalar mixer measurement is active.
Remote command:
[SENSe<Ch>:]FREQuency:CONVersion
5.2.13.2 Frequency Converting Measurements dialog
The "Frequency Converting Measurements" dialog lets you select measurement
parameters for mixer measurements.
Access:
●
Scalar Mixer Meas tab > "More ..."
●
Vector Mixer Meas tab > "More ..."
Figure 5-11: Frequency Converting Measurements dialog: scalar/vector mixer measurements
Meas softtool