Getting Started
R&S
®
ZNA
53User Manual 1178.6462.02 ─ 20
These methods are described in more detail in the following sections.
For further reference:
●
Refer to Chapter 4.2.1, "Display elements of a diagram", on page 97 to obtain
information about the results in the diagram.
●
Refer to Chapter 5.18, "Display softtool", on page 769 and learn how to customize
the screen.
3.3.2.1 Title bar
By default, the analyzer GUI is shown in full screen mode, covering the whole screen
and hiding the Windows taskbar. However, you can toggle the full screen mode using
System – [Display] > "View Bar" > "Title and Task Bar On".
If full screen mode is switched off, the main application window of the vector network
analyzer application provides a standard Windows
®
title bar.
3.3.2.2 Toolbar
The toolbar above the diagram area contains the most frequently used control ele-
ments of the user interface. All controls are also accessible via Softtools.
Operating the instrument
To Next Page
Loading...
