R&S ZNA50 - Page 731

GUI reference
R&S
®
ZNA
731User Manual 1178.6462.02 ─ 20
5.17.2.1 TDR Setup tab
The "TDR Setup" tab allows you to set up the measurement for the time domain trans-
formation, which is then used to analyze the time domain behavior of the DUT (eye
diagram, rise time, skew, ...).
Access: System – [Applic] > "TDR" > "TDR Setup"
The "TDR Setup" contains the following sections/controls:
●
"Topology"
Applic softtool