Preparing for Use
R&S
®
ZNLE
33Getting Started 1323.2873.02 ─ 07
4.6 Configuring the Initial Instrument Settings
This section describes how to set up the R&S ZNLE initially. For further basic
instrument settings, see the R&S ZNLE User Manual.
● Setting the User Interface Language.............................................................. 33
● Setting the Date and Time...............................................................................33
4.6.1 Setting the User Interface Language
The user interface to the R&S ZNLE is available in several languages.
Changing the user interface language
1. Press the [SETUP] key.
2. Press the "Language" softkey.
3. Select the required language.
All text elements of the R&S ZNLE user interface are displayed in the selected
language.
Texts in standard Windows dialog boxes are displayed in the language
defined in the regional settings of the Windows operating system.
4.6.2 Setting the Date and Time
Users with administrator rights can set the date and time for the internal real time
clock as follows:
Opening the Date and Time Properties dialog box
1. Press the [SETUP] key.
2. Press the "Display" softkey.
3. Select the "General" tab in the "Display" dialog box.
4. Press the "Set Date and Time" button to open the standard Windows "Date
and Time Properties" dialog box.
Configuring the Initial Instrument Settings
To Next Page
Loading...
Need help?
General
