en-35
6 CONTROLS
6.2H.3 START UP SLOPE WARNING SCREEN ______________________________
When the ignition switch is turned to crank one of the
following screens will be shown.
If the machine is fitted with the slope monitoring system
the screen will display the logo “TST™” (Tilt Sensor
Technology) and maximum working slope symbol. On
the left hand side of the screen the glow plug symbol
and a count down will be shown to indicate the time left
before the engine will auto crank.
If the machine is not fitted with the slope monitoring
system TST™ the screen will display the logo crossed
out and maximum working slope symbol. On the left
hand side of the screen the glow plug symbol and a
count down will be shown to indicate the time left before
the engine will auto crank.
19°
MAX
16°
MAX
5
5
TST
TST
To Next Page
Loading...
