Ransomes Highway3 - Cutting Cylinder Bearings; Front and Rear Roll Bearings; Grass Deflector

en-75
9 ADJUSTMENTS
9.6 CUTTING CYLINDER BEARINGS_______________________________________
The cutting cylinder bearings are self adjusting taper roller bearings and require no adjustements.
9.7 FRONT AND REAR ROLL BEARINGS ___________________________________
The roll bearings are self adjusting taper roller bearings and require no adjustment
9.8 GRASS DEFLECTOR_________________________________________________
The grass deflector can be positioned by hand as it is ‘friction clamped’ by nuts (tightening the nuts will increase
the clamping effect).