en-69
8 MAINTENANCE & LUBRICATION
8.10 MACHINE MAINTENANCE_______________________________________________
Other Regular Service.
• Verify proper operation of safety interlock switches (Seat switch, etc.)
• Ensure nuts and bolts remain tight.
• visually inspect for hydraulic leaks.
• Keep engine bay clear of debris.
• Keep tyre pressure at correct level. See section 4
• Follow the engine manufacturer’s maintenance recommendations.
• If a label becomes worn or removed, see the LABELS section of this manual or the tractor Parts Manual for
replacement information.
NOTE: When washing machine with pressure spray washers or steam cleaners, avoid washing bearing areas
because cleaning solutions might penetrate bearing seals and cause premature bearing failure.
Storage
• Store petrol or diesel fuel in an approved container in a cool dry place.
• Keep the machine and fuel containers in a locked storage place to prevent tampering and to keep children
from playing with them.
• Do not store fuel or petrol/diesel fuel powered equipment in any closed area where heating appliances,
pilot lights or any sort of open flame is present.
• Before storing, allow the engine to cool, and drain fuel completely from fuel tanks and containers.
• Maximum safety and best mowing results can only be expected if the mower is maintained and operated
properly.
CAUTION
Stop Engine & Remove the Starter Key Before
Pressure Washing
To Next Page
Loading...
