en-102
12 SPECIFICATIONS
12.3 MACHINE SPECIFICATION _____________________________________________
Frame construction: Heavy duty steel chassis with formed steel frame rails.
Cutter Deck Drive: Seven individual hydraulic motors with self lubricating integral bearings.
Transmission: Hydrostatic closed loop parallel cross series SureTrac system. Variable displacement
piston pump. Front high torque fixed displacement piston wheel motors. Full time auto
4WD forward, on demand 4 WD in reverse.,
Speeds:
Cutting: 0 - 12 km/h (0 - 7.5 mph) Forward
0 - 6.4 km/h (0 - 4 mph) Reverse
Transport: 0 - 25 km/h (0 - 15.5 mph) Forward
0 - 6.4 km/h (0 - 4 mph) Reverse
Creep 0 - 8 km/h (0 - 5 mph) Forward
0 - 5 km/h (0 - 3.1 mph) Reverse
Steering: Q-AMP
®
variable rate hydrostatic powered equal displacement cylinders to rear wheels.
Ground pressure: Depends on the tyre pressures and the accessories installed.
Brakes: Hydrostatic braking with wet disc parking brakes on the front wheels.
Battery: BBMS 678 80-capacity 20 Amp Hours 540A
To Next Page
Loading...
