en-27
5 CONTROLS
12 : 34 : 56
0.0 Hours
5.2.Z.6 THE ENGINE WILL NOT START____________________________________
When the ignition key is turned to the start position this screen is shown. If any of the
following flash.
• The parking brake is not applied.
• The cutter switch is not in the OFF position.
• The foot pedal is not in the Neutral position.
• The operator is not in the seat.
Note. The red LED’s either side of the display also flash.
The engine will not start until all the items in the list are correct
5.2.Z.7 CRUISE CONTROL ______________________________________________
Select cruise control
and accept
5.2.Z.8 CRUISE SELECT ________________________________________________
Select between “mow mode, not enabled”, “mow and transport mode” or “transport
mode” use button up and down to move between them.
Press the button .to accept
Press the button to return to previous menu.
To Next Page
Loading...
