en-35
5 CONTROLS
5.2.Z.12 WARNING HYDRAULIC OIL-LEVEL LOW ____________________________
When this screen is shown, the hydraulic oil level is low.
Fill with clean hydraulic oil at the earliest opportunity.
The number in the top right of the screen indicates the total number of faults recorded.
Press the button below the
to confirm the fault.
5.2.Z.13 WARNING SERVICE NEEDED _____________________________________
When this screen is shown, the machine needs a service.
Go to the main menu and select service menu, time until service to show the items
needed for a service.,
The number in the top right of the screen indicates the total number of faults recorded.
Press the button below the
to confirm the fault.
5.2.Z.14 WARNING SOLENOID FAULT______________________________________
When this screen is shown, there is a solenoid fault.
Go to i/o diagnostics for solenoid identification.
The number in the top right of the screen indicates the total number of faults recorded.
Press the button below the
to confirm the fault.
5.2.Z.15 WARNING (TST) TILT SENSOR TECHNOLOGY FAULT _________________
When this screen is shown, there is a fault with the TST. Stop as soon as possible and
contact your local Ransomes Jacobsen Dealer
The number in the top right of the screen indicates the total number of faults recorded.
Press the button below the
to confirm the fault.
To Next Page
Loading...
