en-23
5 CONTROLS
5.2.E MOW SPEED AND CUTTER SWITCH ____________________________________
This switch engages mow speed and cutter rotation.
To cut grass.
Push the front of the switch and move the joysticks forward to lower the decks.
To stop the blade, push the rear of the rocker switch.
When lifted out of work or the operator leaves the seat, blade rotation is stopped.
5.2.F BEACON SWITCH____________________________________________________
Turns the beacon ON and OFF.
Push the front of the switch to turn ON
Push the rear of the switch to turn OFF
5.2.G 4 WHEEL DRIVE IN REVERSE DIRECTION SWITCH________________________
Engages 4 wheel drive while the vehicle is in reverse direction. Hold the switch to keep
engaged.
Push the front of the switch to turn ON
Release the switch to turn OFF
5.2.H CRUISE CONTROL SWITCH ___________________________________________
Used to engage the cruise function when the cutters are engaged.
Push the front of the rocker switch to engage the cruise function.
Push the rear of the rocker switch to disengage the cruise function.
Note. Operation of the transmission pedal will disengage the cruise control.
To Next Page
Loading...
