4 | How to work with the unit
14 / 112 Operating instructions
4 How to work with the unit
4.1 Initial start-up
When starting up your unit for the first time, it has already been properly installed by a RATIONAL Service Partner.
The self-test has already been performed and the unit is therefore ready for operation. You can find all the
information on installation in the installation manual enclosed.
Before working with the unit for the first time
1. Clean the unit and accessories before using the unit for the first time.
Click here for more information: Care [}91]
4.2 Switching the unit on and off
1. To switch on the unit, press and hold the button until the LED lights green:
> The unit will start. The start screen [}15] will appear.
2. To switch off the unit, press and hold the button:
> You will be asked whether you really want to switch off the unit.
3. Press the button OK
>> The unit will be switched off.
To Next Page
Loading...
