Rational iVario Pro XL - Page 33

5 | Setup
80.06.243_iVarioProL-iVarioProXL_IM_en-US 33 / 64
2. Place the spirit level on the bottom of the device and align the device hori-
zontally using the device foot 3.
3
3. Place the spirit level on the bottom of the device and align the device hori-
zontally using the device foot 4.
4
4. Check that the device cover and the pan seal flush.
5. If there is an offset between the device cover and the pan, adjust the device
using the device foot 4.
>> The device is aligned horizontally.
>> The unit cover and the pan close without an offset.