6 | Electrical connection
80.06.243_iVarioProL-iVarioProXL_IM_en-US 37 / 64
a A cross-headed screwdriver is on hand.
a All voltage sources are switched off via an external circuit breaker.
a In order to protect the control panel from scratches and damage, a guard is
fitted on the pan cover, e.g. cardboard or bubble wrap.
1. Open the cover on the front of the device and remove the 2 screws with the
cross-headed screwdriver.
1. Release the control panel from the electrical compartment frame (1) at the
front and pull the control panel gently forwards (2). Turn and place the con-
trol panel on the pan cover (3).
To Next Page
Loading...
