1. Press the button.
› The unit is heating up.
2.
Press the button.
3. Turn the central dial and set the desired cooking cabinet humidity.
4.
› The selection of cooking parameters will automatically
return to the cabinet temperature.
5.
› The selection of cooking parameters will automatically
return to the cooking time.
Cooking modes.
Cooking food with convection heat
6. Turn the central dial and set the desired cooking time.
7.
8.
To cook the food with the help of the core temperature,
press this button once.
9. Turn the central dial and set the desired core temperature.
› Once the set cooking cabinet temperature has been reached, you
will be prompted to load the unit. If you do not load it, preheating
11. Load the unit.
› The food will be cooked. If the cooking time has elapsed or the core
temperature has been reached, an acoustic signal will ask you to
check whether the food has reached the desired result.
Information:
the cooking cabinet. Should the humidity in the cooking cabinet be higher
cabinet be lower than the set level, the unit does not adjust this.
98
To Next Page
Loading...
Need help?
General
