INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Page 30 of 60
THE BEADING DISC MUST EXERT
PRESSURE ON THE TYRE BEAD
BUT NEVER ON THE RIM.
USE VERY CAREFULLY THE BEAD
BREAKING ROLLER IN ORDER TO
AVOID POSSIBLE HANDS CRUSH-
ING.
Fig. 53
3. Rotate clockwise until tyre complete assembly (see
Fig. 54).
FOR THE MOUNTING OF VERY
DIFFICULT WHEELS, USE THE EX-
TENSION OF THE BEAD DEPRES-
SOR (FIG. 54 REF. 1).
Fig. 54
1
4. When these operations are over move the tool and
the bead breaker roll into rest position.
RAVAGLIOLI S.p.A.
7300-M018-2_R
G8945.26 - G8945IT.26 - G8945V.26 - G8945ITV.26 - G8945V.26S - G8945ITV.26S - G8945D.26 - G8945ITD.26 - G8945D.26S - G8945ITD.26S
Fig. 51
12.8.1 Fitting the tyre upper bead mounting
with entrainer (only for G8945.26 -
G8945IT.26 - G8945V.26 - G8945ITV.26
- G8945V.26S - G8945ITV.26S -
G8945D.26S - G8945ITD.26S models)
1. Assemble the entrainer with extension near the edge
rim (see Fig. 52).
Fig. 52
2. Place the bead breaker roll so that the tyre bead
is kept at the same height of the rim groove (see
Fig. 53).
To Next Page
Loading...
Need help?
General
