To Next PageTo Next Page
Need help?Do you have a question about the Ravaglioli GP3.140RS and is the answer not in the manual?
General| Brand | Ravaglioli |
|---|---|
| Model | GP3.140RS |
| Category | Wheel Balancers |
| Language | English |
Details the master switch and protection guard functions and their safety roles.
Highlights residual risks and the placement of warnings as per EN ISO 12100.
Provides essential rules for safe operation, tampering prevention, and environment.
Guidance on connecting the machine to the main power supply safely.
Advises on pre-operation checks for controls and the electrical system.
General advice on properly fitting wheels for accurate balancing.
Step-by-step guide for mounting wheels on the mandrel for specific models.
Step-by-step guide for mounting wheels on the mandrel for other specific models.
Instructions for powering the machine on and off, with safety precautions.
Describes methods for selecting wheel balancing programs.
Details using the caliper arm for quick program selection and measurements.
Explains setting programs via the measurement acquisition screen.
Shows how the monitor indicates points for measurements and weight fitting.
Provides guidance on correctly positioning weights based on monitor indications.
Overview of standard programs available for wheel balancing.
Details the Static program for balancing with adhesive weights on the rim.
Explains the Static-1 program for single weight balancing at 12 o'clock.
Guides through calibration procedures to ensure measurement accuracy.
Procedure for calibrating the mandrel diameter.
Steps to calibrate the sensors that measure weight.
Procedure for calibrating the wheel measurement gauge.
Specific calibration steps for an optional external data gauge.
