To Next PageTo Next Page
Need help?Do you have a question about the Ravaglioli RAVTD1760 WS and is the answer not in the manual?
General| Type | Wheel Balancer |
|---|---|
| Rim Width | 1.5" - 20" |
| Rim Diameter | 10" - 24" |
| Power Supply | 230V |
| Balancing Accuracy | ± 1 gram |
Read and follow safety instructions for machine operation and maintenance.
Adhere to safety and accident-prevention regulations during operation and maintenance.
Details the components and features of the machine models.
Describes the safety features integrated into the wheel aligner.
Specifies the measurement capabilities and precision of the device.
Provides the physical dimensions of the machine.
Outlines the specifications and role of the onboard personal computer.
Explains the function and characteristics of the detection units.
Describes the different types of clamps used with the machine.
Details the specifications of the rotating plates.
Instructions for powering up the machine and starting the software.
Procedure for correctly shutting down the machine and its PC.
Process for configuring database groups for vehicle selection.
Describes the initial screen displayed upon machine startup.
Guide on how to choose the vehicle make and model for diagnosis.
How to view manufacturer-supplied measurements and tolerances.
Steps required before performing vehicle checks or run-out procedures.
Procedure for compensating rim and clamp unbalance.
Preparation steps before taking measurement readings.
Steps to align and level the detectors for accurate measurements.
Process to define Caster, Kingpin, and Included Angle.
Display of a summary of operations performed on the vehicle's rear axle.
Steps before carrying out adjustment operations.
Procedure for adjusting the rear axle components.
Procedure for adjusting the front axle angles (Caster, Camber, Toe).
Access to extra operations or repeating program phases.
How to print the measurement results.
Process for creating and storing custom vehicle groups.
Steps to remove custom vehicle groups from the database.
Process for creating and storing custom vehicle data.
How to delete custom vehicle entries from the database.
Procedures for managing and updating the vehicle database.
Troubleshooting for communication failures between detectors and the cabin.
Explains potential errors in horizontal angle measurements.
