Ravaglioli G3.140R User Manual

INSTRUCTION MANUAL
• For any further information please contact your local dealer or call:
For spare parts drawings refer to the section “ LIST OF COMPONENTS” enclosed to this manual.
GB
TRANSLATION FROM THE
ORIGINAL INSTRUCTIONS
G3.140R
GP3.140R
G3.140RS
GP3.140RS
1297-M007-1_R
1297-M007-1_R
Technical services: RAVAGLIOLI S.p.A. - Via 1° Maggio, 3 - 40037 Pontecchio Marconi - Bologna Italy
Phone (+39) 051 6781511 - Telex 510697 RAV I - Fax (+39) 051 846349 - e-mail: aftersales@ravaglioli.com
- Rev. n. 1 (02/2015)

Ravaglioli G3.140R Specifications

General

Brand	Ravaglioli
Model	G3.140R
Category	Wheel Balancers
Language	English

Summary

2.0 Intended Use

2.1 Staff Training

Emphasizes the need for trained and authorized personnel to operate the machine.

3.0 Safety Devices

3.1 Residual Risks

Addresses residual risks identified per EN ISO 12100 standards.

4.0 General Safety Rules

5.0 Packing and Mobilization for Transport

9.0 Machine Assembly

9.1 Anchoring System

9.3 Assembly Procedures

10.0 Electrical Connection

10.1 Electrical Checks

12.0 Fitting the Wheel on the Mandrel

12.1 Fitting of the Wheel (G3.140R - G3.140RS)

12.2 Fitting of the Wheel (GP3.140R - GP3.140RS)

14.0 Wheel Balancing

14.1 Switching the Machine On and Off

Instructions on how to power on and off the wheel balancing machine.

14.2 Balancing Programs Setting

Details methods for setting balancing programs via gauge arm or screen.

14.3 Indicative Display of Points Where to Detect Measures/To Fit Weight

14.5 Wheel Balancing Screen Page Description

14.6 Use of Machines with Disabled Automatic Gauge

14.7 Standard Balancing Programs

Covers the various standard programs available for wheel balancing.

14.8 Optional Balancing Programs

Details optional programs to enhance balancing capabilities.

14.9 Special Balancing Programs

14.10 Recalculation Function

14.11 Motorbike Mode Wheel Balancing

15.0 User Menu (Options and Calibration)

15.1 Options Menu

15.2 Machine Calibration

Covers calibration procedures for the mandrel, weight sensors, and gauge.

16.0 Error Signals

17.0 Routine Maintenance