Ravaglioli G3.140R - 15.0 User Menu (Options and Calibration); 15.1 Options Menu

INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Page 45 of 60
15.0 USER MENU (OPTIONS AND CALI-
BRATION)
From the main page “Home” press the button
to move to the next screen page and the button
to access the user menu. On the monitor, the follow-
ing screen appears where you can enter the password.
The user login password is: 1234.
After entering the correct password you will see the
following screen:
1 2
KEY
1 – Options menu push-button
2 – Calibrations menu push-button
Fig. 56
15.1 Options menu
Press the button to display the monitor screen
to enable/disable options as shown below:
To enable / disable individual functions simply high-
light the icon using the buttons and/or
and press the button .
Pressing the button may involve, besides, the
change in the unit of measure from "mm" to "inch" and
vice versa (where applicable) or access to a sub-screen
for values settings values (see Par. 15.1.1 or 15.1.2).
After you select/deselect the desired options, exit the
menu by pressing push-button .
1297-M007-1_R
G3.140R - GP3.140R - G3.140RS - GP3.140RS
RAVAGLIOLI S.p.A.