GB
Page 46 of 60
INSTRUCTION, USE AND
MAINTENANCE MANUAL
List of available options
Enable/disable the protection guard/
spin (enabled on machine delivery).
Enable/disable the distance/diameter
detection caliper (enabled on machine
delivery).
Enable/disable the display of static
threshold after each spin (enabled on
machine delivery).
It allows you to set the thresholds for
each of the balancing mode weights
(see Par. 15.1.1).
Enable/disable the lock function for
caliper arm in position (disabled on
machine delivery).
It allows you to change the unit of meas-
urement of the weights from grams to
ounces and vice versa.
It allows you to enable/disable the
width function detected by GAR304
or GAR3067 (enabled when fitted as
standard on the machine).
Enable/disable the ECO-WEIGHT func-
tion (enabled on machine delivery).
Enable/disable the positioning of
weights at "6 o'clock" (disabled on ma-
chine delivery).
Enable/disable the pneumatic brake
after the spin (disabled on machine
delivery).
It allows you to change the unit of
measure of the distance of the weights
fitting point from mm to inches and
vice versa.
Enable/disable the led light (enabled if
mounted on the machine).
Enable/disable the dynamic residues
in the ECO-WEIGHT function (enabled
on machine delivery).
Enable/disable the functions of motor-
bike balancing (disabled on machine
delivery).
Enable/disable the encoder mounted
on the spin motor (disabled on ma-
chine delivery).
It allows you to change the unit of
measurement of the rims width from
mm to inches and vice versa.
It allows you to set the size values of
weights (see Par. 15.1.2).
Enable/disable the RUN-OUT functions
(enabled on machine delivery).
Enable/disable machine print functions
(disabled on machine delivery).
It allows the setting of the retrieval
of the measures by eye: readout of
measures printed on the rim and the
graduated scale of the distance-di-
ameter caliper (disabled on machine
delivery).
NOTE: it is activated only if distance-
diameter caliper is disabled.
Enable/disable the use of the manual
caliper to measure rim width (disa-
bled on machine delivery).
NOTE: it is activated only if distance-
diameter caliper is disabled.
It allows you to change the unit of meas-
urement of the rim diameter from mm
to inches and vice versa.
Enable/disable the functions of weights
positioning laser (GAR311) (disabled
on machine delivery).
Enable/disable the repositioning of the
wheel at the end of the spin (enabled
on machine delivery).
Enable/disable the user function (disa-
bled on machine delivery).
G3.140R - GP3.140R - G3.140RS - GP3.140RS
RAVAGLIOLI S.p.A.
1297-M007-1_R