15
Field Review Mode
The Field Review Mode allows the operator to view any area of a field
operation regardless of the current vehicle location.
To access the Field Review Mode
from the Guidance Screen, touch
Menu Field Review .
Boundaries and Zones
Any field boundaries or AccuBoom
zone features recorded in the active
job are displayed in the Field Review
Mode. Recorded field boundaries will
display as a heavy, blue line while
AccuBoom zone features display with
a thin,
yellow line.
Additional Field Review Mode Icons
The following icons and features may be used while operating in the Field
Review Mode:
• Touch the Zoom icons to zoom in or out in the Field Review Mode.
•The Pan Lock feature automatically scrolls the Field Review display to
follow the vehicle indicator as it moves off of the screen. To enable the Pan
Lock feature, touch the Pan icon until the Pan Lock icon is displayed.
Field Markers
While a job is in progress, Field Markers may be added to locate things such
as well heads, rock piles or other points of interest. During the application,
Cruizer II will display the distance between each marker and the current
vehicle location.
To place a field marker, touch the Marker at the bottom of the screen.
Cruizer II will set a field marker at the current vehicle location.
Moving Markers
To move a marker, touch the base of the marker and select Move .
Touch the desired location for the marker to place the marker in the new
location.
To Next Page
Loading...
