23
AccuBoom Controller Setup
The Controller Setup screen allows the operator to select which sections the
AccuBoom system will automatically control. For example, the operator may
disable AccuBoom control for fence row sections or spray guns. In most
cases, the controller settings will be set and not changed unless the
implement or application type changes.
To configure the AccuBoom controlled sections:
1. From the Home Screen, select
Tools Menu System Sprayer .
2. Select Controller Setup in
the lower, left corner of the Sprayer
screen.
3. Touch the section indicators to
enable or disable sections for
automatic section control.
It is recommended to disable
sections corresponding to fence
row nozzles or spray guns to allow
the operator to manually control
these sections.
Note: Section 1 corresponds to the left most section (as observed from the
operator cabin facing forward) in a standard boom configuration.
4. Verify that the Raven Compatible option is selected.
5. Touch the Accept icon to save the displayed settings and return to
the Sprayer screen.
Display
During a job, the built-in light bar indicates the distance and direction to the
current guidance path.
1. From the Home Screen, select:
Tools Menu Computer Display .
2. Select the Day or Night mode for the Guidance Screen display.
To Next Page
Loading...
