PAGE 32/35 | Installation manual | 016-8000-028EN | Rev. A1
CRX INSTALLATION | CRX + RS1 | RAVEN EUROPE GENERIC
3 CRX INSTALLATION
MOUNTING THE CR7
The following guidelines have been established for
mounting the Field Computer (Figure 39):
Always contact the customer about the
terminal position in the cabin.
Always use a RAM-C ball attachment. (Figure
40 & Figure 41)
Mount the terminal free of vibrations with a
solid bracket. A variety of mounting brackets
are available for this purpose.
Secure all cables in the cabin.
Mount in such a way that the display is
directed straight towards the driver.
Mount in such a way that driver has a clear
view all around.
Hint!:
Mount the terminal in such a way that it does not
obstruct the view of the driver over the top of the right-
hand fender, but also so that the inside of the front
wheel on the ground is still clearly visible.
so
FIGURE 39 CR7 ON A-PILLAR
FIGURE 40 RAM-C BALL ATTACHEMENT
To Next Page
Loading...
