13
Setting the Last Pass Pattern
1. From the Home screen, select ‘Start Guidance’. Then select ‘Last
Pass’ as your pattern.
2. Touch OK to proceed with the system generated file name, or touch
‘Change Name’ to type in a name for the file.
3. If you are using a CAN system, the Start Job Options screen displays.
Select if you will be using AccuBoom (and if using a spray zone map)
or AutoBoom for the job, then press OK to start the job.
4. The Using AutoBoom screen appears. Press OK to review your
AutoBoom settings.
To Next Page
Loading...
Need help?
General
