12
Setting an A-B Line by Heading
1. Touch the Speed/Course Over Ground area to change the setting to
‘COG’.
2. Touch the green ‘Set A’ box on the screen to set Point A.
3. Touch the Menu button.
4. Touch A-B Functions.
5. Touch ‘Set B Using Heading’.
6. Enter the heading for the A-B Line and touch OK. When setting the
heading, remember that 0 degrees is North, 90 degrees is East, 180
degrees is South, and 270 degrees is West.
7. The new A-B Line is set using the heading you entered.
To Next Page
Loading...
