Raven ENVIZIO PLUS - Boom Control Hardware Setup; Boom Sense Wire Configuration; CAN System Configuration

35
9. The no-spray zone will appear on the screen, along with the field
boundary.
10. Press the Menu button and select Record Spray Zone.
11. Select the Recording Reference Point and press OK.
12. Begin recording the spray zone. When you are finished, press the Menu
button and select End Recording. The spray zone will appear on the
screen, along with the field boundary.
13. Press the Menu button and select Save and Exit to save and close the
map.
Helpful Hint: After saving, a 3 boom width No Spray
Zone will be added around the boundary.