47
Guidance Page Smoothing
The Guidance Page Smoothing feature helps to smooth GPS coordinates when
driving in rough or uneven terrain, resulting in better on-screen imaging for course
over ground simulation. The default for this feature is LOW. This feature has
settings for the low, medium, high, or off settings. The low setting will offer slight
smoothing of your course over ground, the medium setting will offer moderate
smoothing, the high setting will offer aggressive smoothing, and the off setting will
turn this feature off.
1. From the Configuration Page 1 screen, touch the ‘Next’ button.
From the Configuration Page 2 screen, touch the ‘Next’ button.
The Configuration Page 3 screen displays. Touch the ‘Next’ button.
The Configuration Page 4 displays. Touch the ‘Next’ button.
The Configuration Page 5 displays.
2. The default for Guidance Page Smoothing is set to ‘LOW’. To change
the setting for this feature, continue to step #3 below. If you wish to
leave this setting as it is, touch ‘Done’.
3. Touch the ‘Guidance Page Smoothing’ button. The Guidance Page
Motion Smoothing screen displays.
4. Touch the circle for the smoothing option that you prefer.
5. Once you are finished selecting your smoothing option, touch the
‘Done’ button. Your setting will now appear next to the Guidance Page
Smoothing button on Configuration Page 5.
To Next Page
Loading...
Need help?
General
