13
Beginner’s Guide
How To Play
● Using batteries
1. Turn the unit over and open the battery holder on the bottom.
2. Insert 4 AAA batteries into the battery holder.
3. Close the cover.
Minimize the volume of the amp.
1. Turn the power on
4.Plug the guitar cable into the INPUT jack will turn the device on.
● Using an AC adapter
Connect the included AC adapter, and slide the power switch to ON position.
Note: Be sure to use the included HOTONE AC adapter ONLY.
● Using USB bus power
Connect the USB jack to computer by USB cable, and slide the power switch to OFF position.
When the remaining charge is low, “Low Battery” appears on the display and flash.
To Next Page
Loading...