Ravo MP-10 - Activate the Looper; Change the Frequency of the Tuner’s Standard Pitch; Looper Function; Return to Play Mode

114 pages

To Next Page

To Previous Page

4. Change the frequency of the tuner’s standard pitch.

Turn the VALUE knob to set the standard pitch of middle A from 435 445 Hz (Default: 440 Hz).

5. Return to play mode

Press either [▼]/[▲] footswitch.

In play mode, press and hold both [▼]/[▲] footswitches until “LOOPER” appears on the screen.

You can use the looper function to record some phrases for practicing, jamming, etc. The

maximum recording time of the looper is 30 seconds.

1. Activate the looper

Looper Function