Ravo MP-10 - Effect Types List

Effect Types List
DynComp (Dynamic Compressor)
This compressor is based on the MXR M132 Super Comp*.
PARM1 PARM2 PARM3
SENS
(Sense)
ATK
(Attack)
VOL
(Volume)
Adjusts the sensitivity.
Higher values result in
higher sensitivity.
Sets compressor attack
time from short to long.
Adjusts the level of the signal
after it has passed through
the compressor.
PREFX (Pre Effects) Module (18)
45
01 99
~
01 99
~
01 99
~